knowledge base

Knowledge Base > Zycoo IPPBX --> Knowledge Base > Zycoo IPPBX

How to perform a full system restore on Zycoo CooVox IPPBX
Last Updated: 28/10/2014

In addition to performing a factory default reset, it is also possible to do full system restore which is a full rebuild of the CooVox system. It take around 10 minutes for the process below to complete:

1. Power off the device
2. Press the RST button after you power on until the sys led goes off
3. Release the RST button
4. Wait approximately 8 minutes and the system will boot up

Related Articles

> How to access a Zycoo ZX Series IPPBX when you don’t know its IP Address
> What are the Default Passwords for ZX Series IPPBX’s
> GSM Module for CooVox U50 and U100 not illuminating on front Panel
> Upgrade Process for Zycoo Coovox version 1.0.5 firmware
> How to Resolve Issues with CooVox IPPBX PSTN and UK CallerID
> How to add custom sound files to Zycoo CooVox system
> What is the root SSH password on Zycoo CooVox IPPBX
> How to factory reset a CooVox series IPPBX when you have no access to the Web GUI