Same Day Dispatch for Orders Before 2pm
VAT-Free EU ExportsSecured by Sage Pay

  Home > Products > Digital Telephony Cards > Atcom Digital Cards > Atcom PRI Cards >

Atcom AX-1D One port ISDN PRI E1/T1/J1 card for Asterisk PBX

Atcom AX-1D ISDN PRI E1/T1/J1 card for Asterisk PBX

Our Price: £216.00 (259.20 inc VAT)

Product Code: ATC-AX1D

Hardware Echo Cancellation

Require AX(E)1D Echo Cancellation?:


Atcom AX1D One ports ISDN PRI E1/T1/J1 card for Asterisk PBX

AX-1D Asterisk card is the telephony PCI card which supports one ISDN PRI E1/T1/J1 ports, optional with teleco-grade hardware echo cancellation. Using AX1D digital PRI card, open source Asterisk PBX and stand alone PC, users can create their IP PBX telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.

  • One ISDN PRI E1/T1/J1 ports
  • Support Asterisk, Freeswitch
  • Support Elastix directly
  • Support Trixbox, AsteriskNOW, PBX in a Flash by reinstalling Dahdi
  • 100% compatible with all features of Asterisk PBX
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
  • Supports standard telephony and data protocols(Including PRI, CAS, CCS for voice and PPP, HDLC, Cisco HDLC and Frame Relay for data modes)
  • Supports chan_ss7 and Openr2
  • Optional hardware echo cancellation


  • ISDN least cost router
  • Calling Card Platforms
  • IVR system
  • Call Center
  • Traditional Calls/VoIP Calls Conference
  • VoIP Gateway
  • Callback Service

Optional DSP Hardware Echo Cancellation Module: EC32

  • G.168 2002 echo cancellation in hardware
  • 1024 taps/128 ms tail per channel on all channel densities
  • DTMF decoding and tone recognition
  • Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction
  • Does not increase the physical size of the card, and no additional slot is required

Voice Modes

  • Pri CPE and PRI NET:
  • EuroISDN
  • 4ESS(AT&T)
  • 5ESS(Lucent)
  • DMS100

Hardware Requirement

  • 1.6-Ghz Pentium IV
  • 512 MB RAM
  • 3.3V or 5V PCI 2.2 slot

PCI Card Dimension

  • 131.5mm (Length)*94mm (height)

Operating System

  • Linux (all versions, releases and distributions from 1.0 up)