The AG-188 supports a Lifeline function. You can use the same handset to place both PSTN and VoIP calls.

First you need to set up the Lifeline using the connector provided with your AG-188.

Then connect your analogue phone to the socket marked “phone” and then connect your landline to port labelled “Line”.

You can now receive incoming PSTN and VoIP calls.

To place the PSTN call, you need to configure the AG-188 as follows:

----Add a new dial rule in the Dial-Peer web page - set the phone number to *T, and select the Lifeline as the Call mode.

----Add a new Digital map item in the Advance Digital Map - set the Prefix Number to *, and the length to 1.

To place a PSTN calls, you first press * to switch to the PSTN line and then place your call as normal.