The TE410P Quad span T1/E1 PCI Card (3.3V) is part of the next generation of Digium hardware designed to improve performance and scalability via bus mastering architecture. The Digium TE410P supports both E1 and T1 environments and is selectable on a per-card/per-port basis. This enables signaling translation between E1 and T1 equipment, allowing inexpensive T1 channel banks to connect with E1 circuits. The TE410P improves I/O speed dramatically (up to 10x); the result is lower CPU usage and increased card density per server.

The TE410P has been designed by Digium to be totally compatible with existing applications and it is fully Asterisk integrated. Furthermore, the TE410P's driver is open source and supports an API interface for custom application development. The close links between Digium and the Asterisk open-source PBX make building voIP solutions simpler and more flexible.

Further Information
The TE410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE410P supports a 3.3v PCI slot only - typically available on newer motherboards and in 64-bit PCI bus architectures. The TE405P is for use only with a 5.0 volt PCI slot.

Documentation

Data Modes: for the TE410P
Cicso HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:

PRI CPE & PRI NET

NI1
NI2
EuroISDN for the TE410P
4ESS (AT&T)
5ESS (Lucent)
DMS100

E&M

Wink
Feature Group B for the TE410P
Feature Group D

FXO & FXS

Ground Start
Loop Start for the TE410P
Loop Start with Disconnect Detect

Certifications:

Telecom FCC Part 68 (TIA-968-A), IC CS-03, TBR 4, TBR 12, TBR 13, AS/ACIF S038, AS/ACIF S016 for the TE410P
Safety UL/CSA 60950, IEC 60950, EN60950, AS/NZS 60950